/ F2 Lite
professional FDM/FFF 3D printer
for small batch production and R&D.
- UNLIMITED OPPORTUNITIES
- ONE PRINTER - ALL MATERIALS
for small batch production and R&D.
- UNLIMITED OPPORTUNITIES
- ONE PRINTER - ALL MATERIALS
/ F2 Lite
professional FDM/FFF 3D printer
for small batch production and R&D.
If you haven't tried F2 Lite, you don't know
what fast 3D printing is.
what fast 3D printing is.
F2 Lite is a professional 3D printer (printing area 450*350*600 mm), which solves the problems of small-scale production and research laboratories.
Two independent high-temperature extruders (up to 550°C) support printing with not only standard polymers (ABS, PLA, PP, etc.) and engineering polymers (ASA, PC, ABS + CF, etc.), but also with high-temperature polymers such as PEEK, PEKK, Ultem, PEEK + CF, etc.
Two independent high-temperature extruders (up to 550°C) support printing with not only standard polymers (ABS, PLA, PP, etc.) and engineering polymers (ASA, PC, ABS + CF, etc.), but also with high-temperature polymers such as PEEK, PEKK, Ultem, PEEK + CF, etc.
The F2 printing technology provides an ultra-fast heating of the extruder to the operating temperature in just 3−10 seconds, the accuracy of maintaining the melt temperature up to 3 °C, and the system of quick changing cartridges with nozzles of different diameters makes the printing process simple and fast.
Optionally, a heated (up to 60°C) cell for two filament coils can be installed in the printer.
Optionally, a heated (up to 60°C) cell for two filament coils can be installed in the printer.
Diameter of nozzles
0,4 | 0,6 | 0,8 mm
Chamber
heating up to 100°С
with convection
with convection
Printing area
450*350*600 mm
Heated bed
quick-change printing platform heated to 160°С
User Interface
original electronics
and intuitive interface
and intuitive interface
Extruders
two independent
high temperature
(up to 550°C)
high temperature
(up to 550°C)
Diameter of nozzles
0,4 | 0,6 | 0,8 mm
Chamber
heating up to 100°С
with convection
with convection
Printing area
450*350*600 mm
Heated bed
quick-change printing platform heated to 160°С
User Interface
original electronics
and intuitive interface
and intuitive interface
Extruders
two independent
high temperature
(up to 550°C)
high temperature
(up to 550°C)
User Interface
Original electronics and intuitive interface
Minimal training is required; by looking at the interface, you will immediately understand how to operate the printer.
User Interface
Original electronics and intuitive interface
Minimal training is required; by looking at the interface, you will immediately understand how to operate the printer.
printing chamber
Heated chamber with forced convection
Forced convection of the chamber and uniform heating allows printing large-sized parts with high interlayer adhesion.
Parts of any size do not delaminate or deform.
Parts of any size do not delaminate or deform.
printing chamber
Heated chamber with forced convection
Forced convection of the chamber and uniform heating allows printing large-sized parts with high interlayer adhesion.
Parts of any size do not delaminate or deform.
Parts of any size do not delaminate or deform.
extruders
Two independent high temperature extruders allow you to print with a full range of available materials
F2 printing technology provides ultra-fast heating of the extruder to the operating temperature in 3-10 seconds, the accuracy of maintaining the melt temperature up to 3°C
extruders
Two independent high temperature extruders allow you to print with a full range of available materials
F2 printing technology provides ultra-fast heating of the extruder to the operating temperature in 3-10 seconds, the accuracy of maintaining the melt temperature up to 3°C
Built-in air filters
Built-in air filtration system traps all particles
When heated, some plastics can evaporate harmful substances, for example, vapors of styrene derivatives, hydrocyanic acid, acetaldehyde.
Built-in high-temperature filters block not only harmful particles, but also unpleasant odours.
Built-in high-temperature filters block not only harmful particles, but also unpleasant odours.
Built-in air filters
Built-in air filtration system traps all particles
When heated, some plastics can evaporate harmful substances, for example, vapors of styrene derivatives, hydrocyanic acid, acetaldehyde.
Built-in high-temperature filters block not only harmful particles, but also unpleasant odours.
Built-in high-temperature filters block not only harmful particles, but also unpleasant odours.
printing bed
Quick-change print platform
heated to 160°C
heated to 160°C
The quick-change printing bed makes the printing process fast and easy.
This avoids damage to models with large dimensions, and also allows you to use the printer almost without interruptions between printing processes.
This avoids damage to models with large dimensions, and also allows you to use the printer almost without interruptions between printing processes.
printing bed
Quick-change print platform
heated to 160°C
heated to 160°C
The quick-change printing bed makes the printing process fast and easy.
This avoids damage to models with large dimensions, and also allows you to use the printer almost without interruptions between printing processes.
This avoids damage to models with large dimensions, and also allows you to use the printer almost without interruptions between printing processes.
By clicking the button, you're agreeing to our terms of service.
We design our printers with care and love - from sketch to final product,
so that you can be confident in every layer of printing on F2 printers.
so that you can be confident in every layer of printing on F2 printers.
© F2 innovations 2022
All rights reserved
All rights reserved
PRODUCTS
SERVICES